37
112657-12-01/15 (translation of the original operating instructions)
Operating Instructions Safety Systems
MGB-L0…-AR.-… and MGB-L0…-AP.-…
17. Inspection and service
WARNING
Loss of the safety function because of damage to the system.
In case of damage, the affected module must be replaced completely. Only accessories or spare parts
that can be ordered from EUCHNER may be replaced.
Regular inspection of the following is necessary to ensure trouble-free long-term operation:
Ì Check the switching function (see section 12.3. Electrical function test on page 31)
Ì Check the secure fastening of the devices and the connections
Ì Check for soiling
No servicing is required; repairs to the device are only allowed to be made by the manufacturer.
NOTICE
The year of manufacture can be seen in the lower right corner of the rating plate.
To Next Page
Loading...
Need help?
General