EUCHNER MGB-L0xx-AR Series User Manual

Operating Instructions Safety Systems
MGB-L0…-AR.-… and MGB-L0…-AP.-…
4
(translation of the original operating instructions) 112657-12-01/15
1. About this document
1.1. Scope
These operating instructions are valid for all MGB-L0…-AR.-… and MGB-L0…-AP.-…. These operating instructions, the docu-
ment “Safety information and maintenance” and any enclosed data sheet form the complete user information for your device.
Series Version System families Product versions
MGB L0 (without guard locking)
…-AP…
from V3.0.0
…-AR…
1.1.1. Notes on older product versions
Products with lower product versions or without a version number are not described by these operating instructions. Please
contact our support team in this case.
1.2. Target group
Design engineers and installation planners for safety devices on machines, as well as setup and servicing staff possessing
special expertise in handling safety components
1.3. Key to symbols
Symbol/depiction Signicance
AP
This section applies on operation as MGB-AP
AR
This section applies on operation as MGB-AR
DIP
OFF
ON
In this section attention must be paid to the DIP switch setting
Printed document
Internet
www
Document is available for download at www.euchner.de
Document on CD
DANGER
WARNING
CAUTION
Safety precautions
Danger of death or severe injuries
Warning about possible injuries
Caution Slight injuries possible
NOTICE
Important!
Notice about possible device damage
Important information
Tip Tip/useful information

EUCHNER MGB-L0xx-AR Series Specifications

General

Brand	EUCHNER
Model	MGB-L0xx-AR Series
Category	Home Safety Product
Language	English