EasyManua.ls Logo

EUFAB PROBC2 / FG2 - Mounting the Bicycles Onto the Carrier; Unfolding the Bicycle Carrier

EUFAB PROBC2 / FG2
52 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
5.6 UNFOLDING THE BICYCLE CARRIER
Figure 17: Unfolding the bicycle carrier
Figure 18: Folding out the number plate
Figure 19: Engaging the number plate
CLICK!
Figure 20: Opening the wheel stoppers
5.7 MOUNTING THE BICYCLES ONTO THE CARRIER
NOTE
In order to improve the performance of your vehicle, mount
the heaviest bicycle rst. If carrying only one bicycle, this
should be mounted in the rail closest to the boot of the
vehicle.
Remove all parts not rmly attached to the bicycle, such
as e-bike batteries, the air pump, the cycle bag, the bicycle
case or navigation devices.
BEWARE!
Personal injury or damage to property possible due to
parts coming loose
Improperly tightened parts on the bicycles can become loose
while driving.

Table of Contents

Related product manuals