2.4 Place the Self-Empty Station
Place the Self-Empty Station against a wall and on a hard, level surface, and install the dock assist mat under
the Self-Empty Station. Place the Self-Empty Station in a location that has strong Wi-Fi signal and the Robot can
easily access. Ensure a clearance of at least 4.9 ft (1.5 m) in front and 1.6 ft (0.5 m) at the sides.
4.9 ft / 1.5 m
1.6 ft / 0.5 m
1.6 ft / 0.5 m
• Always keep the Self-Empty Station plugged in, otherwise the Robot will not automatically return.
2.5 Charge the Robot
Attach the Robot to the Self-Empty Station and it will start charging automatically.
• For the first-time use, you must activate the battery by charging it. Once activation is complete, the
power indicator on the Cordless Stick Vacuum will light up green.
To Next Page
Loading...
