2. Preparing Your Robot Vacuum 3-in-1 E20
2.1 Important Tips Before Use
A. Remove power cords and small objects from the floor that may entangle the
robot.
B. Fold tasseled edges of rugs underneath to prevent tangling the robot. Avoid
cleaning high-pile rugs or rugs thicker than 0.98 in (25 mm) as they may cause
the robot to malfunction. Set a “No-Go” zone to block o areas where the rugs
are thicker than 0.98 in (25 mm).
C. It is strongly recommended to place physical barriers or set a “No-Go” zone
via the eufy clean app in front of fireplaces and certain areas (i.e. air vents) that
may cause damage to the robot if entered.
D. Avoid vacuuming large amounts of water or burning objects or it will potentially
cause safety hazards or damage the robot.
E. Remove objects less than 0.59 in (15 mm) in height on the floor, and objects less
than 0.98 in (25 mm) in height on the carpets, which the Robot cannot recognize
as obstacle and avoid them.
F. Anti-drop sensors will prevent the robot from tumbling down stairs and steep
drops in most cases, but sensors are less eective if dirty or used on carpeted /
reflective / dark floors. Place physical barriers or set a “No-Go” zone to block o
areas where the robot may fall.
To Next Page
Loading...
