EUFY E20 - Clean the Swivel Wheel

8.7 Clean the Swivel Wheel
Hair or dust particles can easily get entangled in the swivel wheel. Be sure to clean the wheel periodically and as
needed.
1. Pull out the swivel wheel with a tool (such as a screwdriver).
2. Clean any hair or debris wrapped around the wheel or entangled inside the wheel cavity.
3. Reinstall the wheel and push it in until it clicks into place.
➀ ➁ ➂
• Do not clean the swivel wheel with water.
8.8 Replace the Dust Bag
Follow the in-app prompts to check if the dust bag is full, and follow the steps below to replace it if needed.
1. Open the dust cover.
2. Pull up to remove the dust bag.
3. Dispose of the used dust bag.
4. Install a new dust bag.
5. Close the dust cover.
➀ ➁ ➂