8.4 Clean the Side Brush
Foreign substances, such as hair, can easily get tangled in the side brush, so it is best to clean it regularly.
1. Remove the side brush.
2. Carefully unwind and pull o any hair or substances that are wrapped between the robot and the side brushes.
3. Reinstall the side brush. You will hear a click when the side brush has been properlly installed.
➀ ➁ ➂
• Only use the side brush when it is completely dry.
8.5 Clean the Floor Brush
1. Push the release tab to the unlock position, remove the brush guard.
2. Lift to take out the brush. Clean the brush with scissors.
➀ ➁ ➂
8.6 Clean the Sensors and Charging Contact Pins
To maintain the best performance, clean the sensors and charging contact pins regularly.
• Dust o the sensors and charging contact pins with a clean cloth.
• Do not use detergents, water or other liquids to clean the sensors and charging contact pins. Avoid
excessive force when wiping.
• Do not use hard materials to scrape the charging contact pins.
To Next Page
Loading...
