EUFY T2252 - Operating Your RoboVac; Using the eufy Clean App; Wi-Fi Connection Reset; Starting, Pausing, and Auto-Cleaning

12 EN EN 13
4
Follow the in-app instructions to set up the Wi-Fi connection.
After connecting successfully, you can control RoboVac via app.
With the app, you can select a cleaning mode, set the time,
schedule a cleaning, adjust suction power, view system status,
receive notifications, and access additional features.
Reset the Wi-Fi connection
To reset the Wi-Fi connection, press and hold on RoboVac for 10
seconds. At the same time, RoboVac will restore the factory default settings.
You will hear a voice prompt when the settings have been reset
and the Wi-Fi status light will slowly flash blue. Now you can follow
the Wi-Fi instructions in the eufy Clean app to set up the Wi-Fi
connection.
Schedule Cleaning
With the eufy Clean app, you can schedule RoboVac to start cleaning at a
particular time.
• You can set the time and customize the cleaning schedules
from Sunday to Saturday on the eufy Clean app. This function
is available in the app only.
Start / Pause Cleaning
• Make sure the main power switch at the side of RoboVac is
turned on before use.
• You can also start or pause cleaning via the eufy Clean app.
1
Press on RoboVac to start cleaning in Auto Mode.
2
Press again to pause cleaning.
Select a Cleaning Mode
• You can also select a cleaning mode via the eufy Clean app.
1
Auto-cleaning
After startup, RoboVac moves from the Charging Base and
automatically determines its cleaning route, following a Z-shaped
cleaning method. When the entire clean is finished, RoboVac
automatically returns to the Charging Base.
Press on RoboVac to start cleaning in Auto Mode.
• In the eufy Clean app, RoboVac can be set to return to the
Charging Base automatically if the battery level becomes
low. Once recharged, RoboVac will resume to finish the
remaining cleaning.
• By default, RoboVac starts in Auto cleaning mode when it
is turned on.
Use Your RoboVac with the eufy Clean App
To enjoy all the available features, it is recommended to control your
RoboVac via the eufy Clean app.
Before you start, make sure that:
• Your smartphone or tablet is running iOS 10.0 (or above) or Android 5.0
(or above).
• The 2.4GHz band wireless signal is enabled on your wireless router.
eufy Clean
eufy Clean
1
1. Download the eufy Clean app from the App Store (iOS devices) or
Google Play (Android devices).
2
Open the app and create a user account
3
Tap the “+” icon to add RoboVac to your eufy Clean account.
Make sure to select the correct model in use.