03
Safety Precautions
IMPORTANT NOTICES
This symbol indicates the refrigerant R600a, and the non-metallic
materials of the appliance are flammable. It’s a warning symbol.
Warning: Risk of fire / flammable materials.
Warning:
When positioning the appliance, ensure that the supply cord is not trapped or damaged.
Do not locate multiple portable socket-outlets or portable power supplies at the rear of the
appliance.
The refrigerant and insulation blowing gas is flammable. When disposing the appliance, do so
only at an authorized waste disposal centre. Do not expose to flames.
When positioning the appliance, ensure that the supply cord is not trapped or damaged.
Do not locate multiple portable socket-outlets or portable power supplies at the rear of the
appliance.
To avoid contamination of food, please respect the following instructions:
– Opening the door for long periods can cause a significant increase of the temperature in the
compartments of the appliance.
– Clean surfaces that can come in contact with food and accessible drainage systems regularly.
– Clean water tanks if they have not been used for 48h; flush the water system connected to a
water supply if water has not been drawn for 5 days.
– If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry,
and leave the door open to prevent mold from developing within the appliance.)
During transportation, do not tilt the machine more than 45 degrees, and do not reverse the
machine. This may damage the compressor and the sealing system.
Remove all packing materials, and check the machine carefully and make sure that the machine,
power cord and plug are normal.
The machine should stand on a level surface. To ensure sufficient ventilation, the back of ice
maker should be at least 150 mm away from the wall, and it should not stand close to the
oven, radiator or other heat source.
To Next Page
Loading...
