Eureka XTREMA EB - Use and Maintenance of the Machine; Suction Closure and Filter Shaker Control

20
1. FILTER SHAKER AND SUCTION CLOSURE LEVER
2. KEY-CONTROLLED SELECTOR SWITCH
3 DIRT CONTAINER UPWARDS AND DOWNWARDS MOVEMENT LEVER
4 DIRT CONTAINER DOOR OPENING CLOSURE LEVER
SUCTION CLOSURE CONTROL
THIS OPERATION MAKES IT POSSIBLE TO SAFEGUARD THE
POLYESTER FILTER.
 With the lever in Pos. 1 turned forwards, the suction is open
 When you pull it back, it is closed.
FILTER SHAKER CONTROL
 By pulling the lever Pos. 1 back fully, the shaker for cleaning the filter is
started.
NB – THE QUALITY OF THE SWEEPER’S WORK DEPENDS VERY
LARGELY ON HOW CLEAN THE FILTER IS.
FOR THIS REASON, YOU ARE ADVISED TO SHAKE IT OFTEN,
PARTICULARLY IF THE SURFACE TO SWEEP IS VERY DUSTY.
 The filter can be cleaned in two ways:
WITH THE MOTOR OFF
Turn the key to pos. 2 and pull the lever right back for 5-10 seconds and
then release it. Repeat the operation 2-3 times.
AUTOMATICALLY (OPTIONAL)
The sweeper can be fitted with an automatic filter shaker system.
This filter starts to work in accordance with the turning off of the sweeper
and the vibration time can be regulated.
IF THE FILTER BOX IS RAISED, THE TWO VIBRATION
SYSTEMS DO NOT WORK.