Eureka XTREMA EB - Primary Functions and Controls

15
PRIMARY FUNCTIONS AND CONTROLS
CONTROL PANEL
1
BRUSH MOTOR AMPEROMETRIC PROTECTION
When the motors current absorption exceeds 125A for some minutes, the cut-out
switch intervenes and stops the motor.
When the cut-out switch intervenes, this means that the brushes turn with difficulty.
Check that the brushes and the rotation items are free.
TO START THE MOTOR UP AGAIN: Remove the key, wait for some minutes, push
the bottom until it is inserted and start up again
2
RED LED BRUSH MOTOR BRUSH WEAR
The led comes on and remains on when the brushes are worn
3
RED LED BRUSH MOTOR TEMPERATURE
When the internal temperature of the motor exceeds 85-95 °C the led comes on, the
motor cuts out and the alarm beeper starts to sound