Eureka XTREMA EB - 50 Hours Scheduled Servicing

66
2°
XTREMA EB SWEEPER SERVICING AND MAINTENANCE
SCHEDULED SERVICING
AFTER 100 HOURS
DATE
DAY
MONTH
YEAR
EFFECTIVE NO
OF HOURS
Before starting work, carefully check for oil leaks and check the state of transmission belt
wear
BRUSH MOTORS
 Clean the outside of the motor with compressed air, especially the slits at the back
 Clean above the brushes and the manifold
TRACTION MOTOR
 Clean the outside of the motor with compressed air, especially the upper part where the
brushes and manifold are situated
MACHINE
 Check the battery liquid level
 Check the load state of each element
 Check the state of brush wear
 Check the right and left hand side, rear and front and flap dust guard sealing.
 Check the rubbish container sealing
 Check the dust filter efficiency
 Check belt tension
 Check the hydraulic system piping
 Check the functioning of all the instruments and control levers
 Check the good functioning of the braking system
 Check the hydraulic oil level
 Check the machine in all its functions
THE SCHEDULED SERVICING WAS CARRIED OUT BY:
NAME:_______________________________________________
SURNAME:___________________________________________
SIGNATURE:______________________________________________
_
SEAL OR STAMP OF THE DEALER
CARRYING OUT THE SCHEDULED
SERVICING
N.B.: