Eureka XTREMA EB - 300 Hours Scheduled Servicing

69
5°
XTREMA EB SWEEPER SERVICING AND MAINTENANCE
SCHEDULED SERVICING
AFTER 400
HOURS
DATE
DAY
MONTH
YEAR
EFFECTIVE NO
OF HOURS
Before starting work, carefully check for oil leaks and check the state of transmission belt
wear
MOTOR BRUSHES
 Clean the outside of the motor with compressed air, especially the slits at the back
 Clean above the brushes and the manifold
TRACTION MOTOR
 Clean the outside of the motor with compressed air, especially the upper part where the
brushes and manifold are situated
 Check the degree of brush wear minimum measurement 12-13 mm
MACHINE
 Check the battery liquid level
 Check the load state of each element
 Check the state of brush wear
 Check the right and left hand side, rear and
front and flap dust guard sealing
 Check the dirt container sealing
 Check the dust filter efficiency
 Check belt tension
 Check the steering chain tension
 Check the functioning of all the
instruments, wheels and control levers
 Check the good functioning of the braking
system
 Lubricate all the points required
 Check the hydraulic oil level
 Check the state of all the pipes
 Test the machine in all its functions
THE SCHEDULED SERVICING WAS CARRIED OUT BY:
NAME:_______________________________________________
SURNAME:___________________________________________
SIGNATURE:______________________________________________
_
SEAL OR STAMP OF THE DEALER
CARRYING OUT THE SCHEDULED
SERVICING
N.B.: