EUROMAG | MC608 | Ed. 10/2018
2 PRODUCT DESCRIPTION MC608
2.3 CONVERTER INSTALLATION TYPES
Depending on the version of the MC608 converter, it can be installed in the system in two different ways:
• COMPACT (Fig. 3): The converter is mounted to
the relevant detection sensor.
Fig. 3 Compact Version
• REMOTE (Fig. 4): The converter, if powered from
the mains (MC608A/P/I) can be installed up to
100 meters away from the sensor while battery-
powered converter (MC608B/R) can be installed up
to a maximum of 30 meters away from the sensor.
Fig. 4 Remote version
2.4 CASING
The MC608 converter is protected by suitable casing specically chosen for each product version. In
particular, protective casings can be:
» Solid and reliable casing in aluminium IP68 for MC608A/B/R
» Stainless steel IP54 casing for MC608I for remote installations
» Solid thermoplastic casing for installations in electrical cabinets MC608P
2.5 POWER BATTERIES
The MC608B and MC608R converters are battery-powered via a primary lithium battery as well as a
rechargeable lithium battery. It is therefore necessary to consider the following:
» Lithium batteries are the primary energy source because of their high-energy density, and are
created to meet the highest safety standards. However, they can be potentially hazardous if they
are exposed to electrical or mechanical abuse. In many cases, this is associated with excessive
heat production in which the increased internal pressure could lead to cell rupture.
To Next Page
Loading...
Need help?
General
