EUROMAG | MC608 | Ed. 10/2018
MC608 PRODUCT DESCRIPTION 2
These basic precautions need to be followed when handling and using lithium batteries:
IMPORTANT INSTRUCTIONS!
• Do not short-circuit, recharge, overload or reverse-connect the battery
• Do not expose the battery to temperatures higher than those specied, as it will incinerate
• Do not crush, puncture or open the cells or disassemble the battery packs
• Do not weld or braze the battery body or battery packs
• Do not expose the contents to water
The use of lithium batteries is regulated under the United Nations Model Regulations on the Transport
of Dangerous Goods (UN Model Regulations on the Transport of Dangerous Goods), document ST/SG/
AC.10/1 Rev. 20.
These are basic precautions that should be followed during the transport of lithium batteries:
IMPORTANT NOTES!
• Transport only in special packages with labels and special transport documents specic to
current regulations.
• Be careful when handling, transporting and packing the batteries so as to avoid short-
circuiting.
• The batteries comply with the requirements set out in the “UN Manual of Tests and Criteria,
Part III, subsection 38.3” for air transport and with the provisions of the ADR regulations for
transport by truck/ship.
Remove the battery from the transmitter before sending the ow meter to EUROMAG
INTERNATIONAL in case of maintenance or any intervention under warranty.
2.6 DATA SAFETY
All versions of the MC608 converter guarantee safety of the collected and processed data as a
result of the internal memory (EEPROM) on which the data are saved.
The integrated circulating memory allows the storage of data with 200,000 log lines (the data are kept
for more than 6 years with factory settings); when the memory is full, the new data will automatically
overwrite the old data.
In order to prevent the loss of saved data, and to be able to better manage it on its management
systems, the unit is supplied with a specialized software that allows users to communicate with the
electronics of the MC608 via IrCOM or RS485 Modbus serial interfaces, that can be connected to any
PC, laptop and/or tablet with a Windows operating system.
Fast download, data management, easy programming and an advanced self-diagnosis system, that
automatically perform a wide range of essential checks, make the MC608 converter a highly efcient
and irreplaceable tool for uid detection in water management systems.
A multi-level password system also allows controlled access to the data collected and guarantees
condentiality.
To Next Page
Loading...
Need help?
General
