Euromaid MT70 - Page 22

MT70InstallationandInstructionsofuse
Setting cooking end time
You can set the end time during cooking.
In single、upper and lower modes
1.Press the Time Button several times untill the end time icon and the three digits on the display begin to
flash.
2.Turn the Time / Temp /Function Control Knob to set the desired end time.
3.The oven operates with the selected end time automatically after press the Time Button or wait for
about 3 seconds.
（1） During cooking, you can adjust the previously set end time with the Time Button and Time / Temp
/Function Control Knob for better results.
（2）You can not set cook time during the function with probe.
In twin mode
End times for the upper and lower modes can be selected using the Time Button、the upper and lower
exchange button and the Time / Temp /Function Control Knob.
1.Press the Time Button several times untill the end time icon and the three digits on the display begin to
flash（upper or lower）.
2.Turn the Time / Temp /Function Control Knob to set the desired end time.
3.Press the upper and lower exchange button ，the end time icon and the three digits on the display
begin to flash（lower or upper）.
4. Turn the Time / Temp /Function Control Knob to set the desired end time.
5. The oven operates with the selected end time automatically after press the Time Button or wait for
about 3 seconds.
During cooking, you can adjust the previously set end time with the Time Button and Time / Temp
/Function Control Knob for better results.
Setting a cook time
You can set the cook time during cooking.
In single、upper and lower modes
1.Press the Time Button several times untill the end time icon and the three digits on the display begin to
flash.
2.Turn the Time / Temp/Function Control Knob to set the desired cook time.
3.The oven operates with the selected cook time automatically after press the Time Button or wait for
about 3 seconds.
（1） During cooking, you can adjust the previously set cook time with the Time Button and Time / Temp
/Function Control Knob for better results.
（2）You can not set cook time during the function with probe.