MT70InstallationandInstructionsofuse
Checking the temperature
● Press the Temperature Button and Time Button at the same time to check the tempreture of
the upper test probe.
● Press the Temperature Button and upper and lower exchange Button to check the
tempreture of the lower test probe.
● Press the Temperature Button and funciton button to Check the tempreture of probe
Cleaning and Care
Cleaning the oven door
For normal use, the oven door should not be removed but if removal is necessary, for example, for cleaning,
follow these instructions. The oven door is heavy.
Removing the door
1. Flip open the clips at both hinges.
2. With both hands, grasp the sides of the oven door at its middle.
3. Rotate the door by approximately 70 ° until the hinges can be taken out completely from the hinge holes.
To Next Page
Loading...
