EVBox Elvi - Unpack Elvi

8
1. Unpack Elvi
1.1
Place Elvi package on a at and stable surface.
Remove sleeve.
1.2
Set the boxes aside.
Box 1 contains the charging station.
Box 2 contains the charging cable.
1.3
Open the charging station box.
Put the instructions folder (A) aside.
The keys (B) found in this folder are only needed
for removing the charging station (C) from its wall
dock (D) (in case of maintenance or to change the
charging cable).
Note: After installation, hand over the folder to
the user, as it also contains the charge card (E),
the key fob (F) and station ID + security code (G).
1.4
Take out the charging station together with its
cardboard buffer from its box.
1.5
Take out the wall dock from its box.
Skip this step if the wall dock is already installed.
(In this case, the wall dock is not included in the
box.)
A
D
C
B
E
F
G
EN