Evco c-pro 3 micro - Page 40

EVCO S.p.A. c-pro 3 micro and c-pro 3 kilo | Hardware manual ver. 1.0 | Code 114CP3UKE104
page 40 of 62
Networks / CAN
Bus
[ press button
RIGHT to
show it ]
Bus Status parameter available in read only modality
CAN bus status
OK = status OK
WARNING = warning
PASSIVE = bus working in rx only
BUS OFF = bus stopped
Networks / CAN
Bus
[ press button
RIGHT to
show it ]
Cnt Rx parameter available in read only modality number of packages received
Networks / CAN
Bus
[ press button
RIGHT to
show it ]
Cnt Tx parameter available in read only modality number of packages transmitted
Networks / CAN
Bus
[ press button
RIGHT to
show it ]
Cnt Ovf parameter available in read only modality number of packages in overflow
Networks / CAN
Bus
[ press button
RIGHT to
show it ]
Cnt Passive parameter available in read only modality number of transactions in passive status
Networks / CAN
Bus
[ press button
RIGHT to
show it ]
Cnt Bus Off parameter available in read only modality number of transactions in Bus off status
Networks /
UART1 (1)
Address 1 247 - - - 1
local (or of the controller) Modbus node
address in a RS-485 network wired on the
RS-485 port with Modbus slave
communication protocol