Evco c-pro 3 micro User Manual

EVCO S.p.A. c-pro 3 micro and c-pro 3 kilo | Hardware manual ver. 1.0 | Code 114CP3UKE104
page 45 of 62
Free stack parameter available in read only modality number of packages in reception
Debug 5V probe parameter available in read only modality
reading the power supply voltage of the
ratiometric transducers
Debug 12V probe parameter available in read only modality
reading the power supply voltage of the
0-20 mA / 4-20 mA / 0-10 V transducers
Debug 12V exp parameter available in read only modality
reading the power supply voltage coming
from the upper board
Notes:
(1) the submenu is visible on condition that the application software expects the RS-485 port with Modbus slave communication
protocol is configured to support the Modbus communication protocol
(2) the submenu is visible on condition that the application software expects the RS-485 port with Modbus master communication
protocol is configured to support the Modbus communication protocol
(3) the parameter is meaningful on condition that the RS-485 port is configured to support the Modbus master communication
protocol.

Evco c-pro 3 micro Specifications

General

Brand	Evco
Model	c-pro 3 micro
Category	Controller
Language	English