Evco c-pro 3 micro - Page 60

EVCO S.p.A. c-pro 3 micro and c-pro 3 kilo | Hardware manual ver. 1.0 | Code 114CP3UKE104
page 60 of 62
Communication ports:
In c-pro 3 micro and c-pro 3 kilo:
• 1 non optoisolated OTG USB port (for programming and debug)
• 1 non optoisolated CAN port with CANbus communication protocol
• 1 non optoisolated RS-485 port with Modbus slave communication protocol, not
available in c-pro 3 micro BASIC (artiche code EPU2B ed EPU2L)
In c-pro 3 micro+ and c-pro 3 kilo+:
• 1 non optoisolated OTG USB port (for programming and debug)
• 1 non optoisolated CAN port with CANbus communication protocol
• 2 non optoisolated RS-485 ports of which 1 with Modbus master communication
protocol and 1 with Modbus slave communication protocol.
In c-pro 3 EXP micro, c-pro 3 EXP kilo, c-pro 3 EXP micro+ and c-pro 3 EXP kilo+:
• 1 non optoisolated OTG USB port (for programming and debug)
• 1 non optoisolated CAN port with CANbus communication protocol.