EasyManua.ls Logo

Evector EV-97 EUROSTAR SL MICROLIGHT - Periodic Maintenance and Inspections

Evector EV-97 EUROSTAR SL MICROLIGHT
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EV-97 Eurostar SL Microlight Maintenance Manual GEN/EUR/04 Issue 4 21
3.6.
Fuel system
3.6.1.
Visually check condition, integrity, attachment and
security of hoses - replace those damaged
3.6.2.
Visually check fuel filter condition
- replace dirty filter.
3.6.3.
Visually check system for leaks
3.7.
Cooling system
3.7.1.
Visually check radiator for condition, secure
attachment and leaks
3.7.2.
Visually check condition, attachment of hoses;
check system for leaks
3.7.3.
Tighten hose clips if needed
3.7.4.
Check coolant quantity in the expansion tank -
add or change coolant acc.
to the engine manual
if needed
3.7.5
3.7.6
Visually check condition and attachment of
overflow bottle on the firewall. Check condition of
hose from expansion tank to overflow bottle.
Check overflow bottle is approx. 1/3 full when
engine cold.
3.8.
Lubrication system
3.8.1.
Visually check condition and attachment of oil
tank
3.8.2.
Check oil cooler for condition, attachment and
leaks.
3.8.3.
Visually check hoses for condition, leaks,
attachment and security -
replace damaged
hoses. Tighten hose clips if necessary.
3.8.4.
Check oil quantity - add or change oil according to
the engine manual if needed
3.9.
Exhaust system
3.9.1.
Visually check exhaust pipes for condition,
cracks, deformations or damage repair or
replace if necessary.
3.9.2.
Visually check condition and attachment of the
muffler (silencer) - repair or replace if necessary.
3.9.3.
Check joint security
3.10.
Reinstall lower engine cowling
3.10.1.
Reinstall upper engine cowling when the
inspection is completed and engine test run
performed
3.11
Lubricate per Lubricating Chart
4.
PROPELLER
see manufacturer instructions +
4.1.
Blades
4.1.1.
Inspect blades for abrasions, cracks, paint
damage, condition of blades leading
edges and
tips - repair according to the propeller manual
4.2.
Spinner
4.2.1.
Remove spinner and visually check condition for
abrasions, cracks, paint damage;
repair any
damage.
4.3.
Propeller
see manufacturer instructions +
4.3.1.
Check prop attachment bolt torque and security.
4.3.2.
Check tracking
4.3.3.
Re-fit spinner

Table of Contents

Related product manuals