Need help?Do you have a question about the Evector EV-97 EUROSTAR SL MICROLIGHT and is the answer not in the manual?
General| Category | Microlight |
|---|---|
| Crew | 1 |
| Capacity | 1 passenger |
| Engine | Rotax 912ULS |
| Engine Power | 73.5 kW (98.6 hp) |
| Manufacturer | Evector |
| Max Takeoff Weight | 450 kg |
| Powerplant | 1 x Rotax 912ULS |
| Cruise Speed | 200 km/h |
| Service Ceiling | 4, 000 m |
Description of the aircraft's construction and materials.
Visual representation of aircraft dimensions.
Detailed physical measurements of the aircraft components.
Information on aircraft weight limits and capacities.
Details on the aircraft's center of gravity ranges.
Description of the aircraft's wing structure and materials.
Description of the horizontal tail unit's construction.
Description of the vertical tail unit's construction.
Details on the aircraft's fixed landing gear system.
Description of the aircraft's wheel assemblies.
Explanation of the hydraulic disc brake system.
Information on the standard tyre specifications.
Description of the cockpit seating, canopy, and instruments.
Reference to appendix for additional equipment.
Description of the longitudinal (pitch) control system.
Explanation of the aileron control system using push rods.
Description of the rudder control system using cables.
Control of brakes via toe pedals.
Description of the flap control mechanism.
Description of the elevator trim tab control system.
Introduction to the aircraft's power plant and engine.
Technical specifications and performance of the Rotax 912 UL engine.
Table of engine operational limits and caution ranges.
Description of the engine mount structure.
Description of the engine cowlings and their disassembly.
Procedure for lower cowling removal.
Description of the fuel tank, filter, and pump system.
Details on the engine's liquid and air cooling systems.
Description of the cockpit heating and demisting system.
Description of the aircraft's ventilation system.
Overview of the aircraft's electrical system and battery.
Description of the pitot-static system and instrument connections.
Description of the ballistic rescue system.
Description of the stall warning device and its function.
Tools and procedure for wing removal.
Procedure for re-installing the aircraft wing.
Procedure for removing and re-installing the HTU.
Procedure for removing and re-installing the rudder.
Procedure for the pre-flight visual inspection.
Procedure for the post-flight inspection.
Information on periodic inspection intervals and recommendations.
Intervals for scheduled maintenance checks.
Use of work sheets for maintenance records.
Table detailing periodic maintenance tasks and intervals.
Continuation of periodic maintenance tasks for various systems.
Periodic maintenance checks for landing gear and wheels.
Periodic maintenance checks for brakes and wing components.
Periodic maintenance checks for fuselage, canopy, and tail units.
Periodic maintenance checks for cockpit instruments, controls, and harnesses.
Periodic maintenance checks for the ballistic recovery system.
Reference to the Rotax engine maintenance manual.
Procedure for checking engine oil level and procedures.
Procedure for draining the engine oil.
Procedure for replacing the engine oil filter.
Information on coolant capacity and level checks.
Overview of the brake system.
Recommended brake fluid types.
Procedure for refilling brake fluid.
Procedure for emptying brake fluid.
Procedure for replacing brake pads.
Procedure for bleeding the brake system.
Introduction to setting control surface deflections.
Figure showing control surface deflections.
Adjustment of aileron control system and differential.
Procedure for adjusting flap deflection settings.
Description of elevator stops and adjustment.
Procedure for adjusting rudder stops and deflections.
Procedure for adjusting trim tab control cables.
Precautions to be observed during fueling.
Procedure for safely emptying the fuel tank.
Reference to engine operator's manual for lubrication.
Recommended oils and greases for airframe lubrication.
Table detailing lubrication points and intervals.
Locations of access holes for maintenance.
Procedure for adjusting rudder cable tension.
Procedure for adjusting rudder pedal position.
Support points for main wheel puncture repair.
Procedure for supporting the nose wheel.
Step-by-step guide for tyre puncture repair.
Recommended tyre pressures.
Recommendations for cleaning external paintwork.
Recommendations for cleaning the aircraft canopy.
Recommendations for cleaning upholstery.
Recommended procedure for determining empty weight.
Formula and data for calculating operating CG range.
To Next Page
