Press the tab and twist,
then remove the hook
from the anchor .
Tilt and slide the adjuster
to loosen.
2
Press the adjuster release
button to loosen tether
strap.
The Tether Strap that comes with your child
restraint will be one of the two types below.
Using the Child Restraint with the 5-point Harness: 9 – 21.3 kg (20 – 47 lbs)
24 25
Removing the Tether Strap
1
3
• To avoid a strangulation hazard, you
MUST
tightly
roll or fold excess tether strap and secure with the
rubber band.
• Attach the tether hook to the storage clip when not
in use. This will keep an unused tether from hitting
someone during a crash.
When the tether strap
is not in use you MUST
attach the hook to the
back of the child restraint,
and tightly roll and secure
the strap with the rubber
band.
A loose tether strap and
hook may injure your
child.
Removing the LATCH System
When the LATCH system
is not in use you MUST
securely store the LATCH
harness in the storage
area provided. Route the
LATCH harness through
the back of the seat and
securely attach each
hook as shown.
To avoid a strangulation hazard, you MUST store
the unused LATCH harness, with all slack removed, in
storage area on the back of the seat. Roll or fold the
excess LATCH strap and secure with a rubber band to
prevent serious injury to vehicle occupants.
Press the adjuster release
button to loosen harness strap.
To remove the hook , press the tab and twist, then
remove from anchor .
1
2
3
WARNING
WARNING
To Next Page
Loading...
Need help?
General