30 31
Not available on all models.
Installing the Accessories
• DO NOT use the accessories to store cans or hard
cups. Only for use with soft cups (such as styrofoam
or paper).
• DO NOT place any cups that contain hot liquids
(such as coffee or tea) in the accessories.
• DO NOT snap any other items to this child restraint
unless it has been certified for use with this specific
child restraint.
Remove pad from side of seat and install deluxe
cup holder or storage accessory by inserting
tabs into holes on seat. Replace pad over the seat.
Before attempting to remove the pad, you must first
remove the harness system (see page 27).
After removing the harness system, follow the procedures
below to remove the pad. To reinstall the pad, reverse
the steps below.
Gently pull the pad and the four-prong retainer
strip away from the base of the child restraint. To
launder the seat pad, remove the retainer strip from
the seat pad.
The optional body pillow
can be used to help support a
child by placing it in the child
restraint, as shown.
Removing the Pad
Installing the Body Pillow
Not available on all models.
WARNING
To Next Page
Loading...
Need help?
General