Rear-facing
31
PLACE
AT
ARMPIT
CLICK!
Restraints with SecureRight™
Correct Incorrect
SecureRight™
Rear-facing Installation with Lower
Anchor (UAS) Connectors
Lift pad off front edge of seat.
Attach lower anchor/UAS
connectors to the vehicle
lower anchor bars until they
lock onto the bars on both
sides of the seat.
Reconnect the seat pad to the
front of the child restraint.
Using your full weight, push
the child restraint firmly into
the vehicle seat while pulling
up on the Lower Anchor Strap
to tighten, as shown.
IMPORTANT: Make
sure both lower anchor
connectors are facing
downward as shown and
the straps are not twisted.
To Next Page
Loading...
