TimeFactor User Guide Control Knobs/Effect Parameters
24
Reverse
Xnob/Crossfade: In Reverse, the audio segments are read backwards and must be spliced.
TimeFactor performs a crossfade at the splice point to prevent abrupt changes that could
result in glitching or clicking. Xnob sets the rate of the crossfade. Small values result in fast
crossfades and a more audible rhythm for the reverse effect, larger values more gradual
crossfades and a smoother reverse sound. Xnob sets the crossfade rate (XFADE) from 2 ms to
200 ms.
Depth: Selects the amount of modulation (0=OFF, 10=MAX).
Speed: Sets the delay modulation rate (0-5Hz).
Filter: A low pass/high cut filter variable from 0 (no filtering) to 100 (extreme hi cut).
Note: On certain Effect Types where changing delay time causes pitch fluctuations, these
pitch effects have been removed for the operations of Tap Tempo and changing Presets, yet
remain when the parameter is changed via the knob or expression pedal.
To Next Page
Loading...
