Eventide TimeFactor - Global and Utility Functions; Global Function Settings

TimeFactor User Guide System Menu Tree
50
If SYSTEM is selected, all System Mode settings are dumped.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[CLK IN] – MIDI Input Clock Enable (ON, OFF)
Press the Encoder to select. Turn Encoder to set MIDI Input Clock ON or OFF.
If ON, MIDI Clock is used as the Tempo source, instead of Tap.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[CLK OUT] – MIDI Output Clock Enable (ON, OFF)
Press the Encoder to select. Turn Encoder to set MIDI Output Clock ON or OFF.
If ON, TimeFactor can now be used as a MIDI Clock source.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[CLK FLT] – MIDI Clock Filter Enable (ON, OFF)
Press the Encoder to select. Turn Encoder to set MIDI Clock Filter ON or OFF.
If ON, TimeFactor can be used with an unstable MIDI Clock source.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[GLOBAL] - Global Functions
After entering System mode, turn the Encoder to select [GLOBAL], then press the Encoder to
enter the Global functions settings mode. Turn the Encoder to scroll through the following
Global functions. Press the Encoder to select and set:
[MIX] – Enable Global Mix (ON, OFF)
If Mix is ON, values are still stored with Presets, but not used. Instead, the current mix value is
used for all Presets. If Mix is OFF, the value at the time the Preset was saved is used.
Press the Middle Footswitch once to back-up one level to GLOBAL menu.
Press the Middle Footswitch twice to go to top level System menu.
[TEMPO] – Enable Global Tempo (ON, OFF)
If Tempo is ON, values are still stored with Presets, but not used. Instead, the current tempo
value is used for all Presets. If Tempo is OFF, the value at the time the Preset was saved is
used.
Press the Middle Footswitch once to back-up one level to GLOBAL menu.
Press the Middle Footswitch twice to go to top level System menu.