4 For Professional Technical Support call 1-844-241-5521
Pre-Installation
APPLICATION
This automatic submersible utility pump is designed for water removal applications. Pump water only with this pump. It can
automatically drain or remove water from the following: swimming pool covers, sinks, window wells, boats, low spot in yards, or other
flooded areas.
This pump has not been tested or approved for use in swimming pools or in salt-water marine areas. This pump is not designed to
function as a permanently installed sump pump. It is also not engineered to be run continuously as a “fountain” or “waterfall” pump.
Do not use where water re-circulates.
Features:
Operating water depth: minimum 2 in.
TOOLS REQUIRED
MATERIALS REQUIRED (NOT INCLUDED)
NOTE: The hose and hose kit are not shown to scale.
Garden Hose or Sump Pump Discharge Hose kit
Safety
Goggles
Phillips
Screwdriver
Flathead
Screwdriver
To Next Page
Loading...
