To Next PageTo Next PageWhy won't my Everbilt Water Pump start?
Your Everbilt Water Pump might not start due to several reasons: a blown fuse (replace the fuse), a tripped breaker (reset the breaker), a disconnected plug (secure the plug), a corroded plug (clean the plug prongs), a motor failure (replace the pump), or ice/blockage locking the impeller (remove the blockage).
What to do if my Everbilt UT00801 won't pump out water?
If your Everbilt Water Pump isn't pumping water, it could be due to a blocked screen (clean the screen), a kinked/bent/coiled hose (straighten the hose), an airlock (clean the anti-air lock hole), an overly long hose (use a shorter hose), a loose impeller (reassemble the impeller), or a broken impeller (replace the impeller).
General| Model | UT00801 |
|---|---|
| Category | Water Pump |
| Brand | Everbilt |
| Impeller Material | Thermoplastic |
| Float Switch Included | Yes |
| Power Source | Electric |
| Cord Length | 10 ft |
Critical warnings regarding electrical shock hazards, including disconnecting power and avoiding wet conditions.
Prohibition of pumping flammable liquids or operating near explosive vapors due to severe fire/explosion risk.
Guidelines on correct voltage, grounding, circuit protection, and prohibition of extension cords.
Details the intended uses of the submersible utility pump for water removal.
Lists the necessary tools for pump installation and maintenance.
Lists materials like hoses and kits that are not provided with the pump.
Details the items included in the pump package.
Provides technical specifications like power supply, temperature range, and discharge type.
Instructions for connecting a 3/4 inch garden hose to the pump discharge.
Instructions for connecting a 1-1/4 inch hose kit to the pump discharge.
Steps for safely plugging the pump into a power outlet and initial setup.
Guidance on running the pump, monitoring water levels, and unplugging.
Explains the airlock condition and provides steps to prevent or resolve it.
Actions to perform for regular maintenance and cleaning, like inspecting the screen.
Prohibitions regarding disassembly, lifting by the power cord, and motor housing.
Step-by-step instructions for disassembling and cleaning a pump clogged with debris.
Lists possible causes and corrective actions for when the pump fails to start.
Identifies causes for no water output and provides solutions for troubleshooting.
