EasyManua.ls Logo

Everbilt UT00801 - Troubleshooting; Pump Does Not Start; Pump Unable to Pump Water

Everbilt UT00801
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9 HOMEDEPOT.COM
Please contact 1-844-241-5521 for further assistance.
Troubleshooting
Problem Possible Cause Corrective Action
The pump does not start. 1. The fuse is blown.
2. The breaker is tripped.
3. The plug is disconnected.
4. The plug is corroded.
5. The motor failed.
6. Ice or blockage has locked the impeller.
1. Replace the fuse.
2. Reset the breaker.
3. Secure the plug.
4. Clean the plug prongs.
5. Replace the pump.
6. Remove the blockage.
The pump is unable to pump out water. 1. The screen is blocked.
2. The hose is kinked, bent sharply or coiled.
3. There is airlock.
4. The hose length is too long.
5. The impeller is loose on the shaft.
6. The impeller is broken.
1. Clean the screen.
2. Straighten the hose.
3. Clean the anti-air lock hole.
4. Use a shorter hose.
5. Reassemble the impeller.
6. Replace the impeller.

Related product manuals