4
Pre-Installation
APPLICATION
This submersible utility pump is designed for water removal applications. Pump water only with this pump. It can drain or remove water
from the following: pits, sinks, window wells, basements, swimming pool covers, boats, low spot in yards, or other flooded areas.
This pump has not been tested or approved for use in swimming pools or in salt-water marine areas. This pump is not designed to
function as a permanently installed sump pump. It is also not engineered to be run continuously as a “fountain” or “waterfall” pump.
Do not use where water recirculates.
Not designed for use as a swimming pool drainer.
Features:
Operating water depth: minimum1 in.
TOOLS REQUIRED
MATERIALS REQUIRED (NOT INCLUDED)
NOTE: The hose and hose kit are not shown to scale.
Safety Goggles
Phillips
Screwdriver
Flathead
Screwdriver
Wrench
Garden Hose or
Sump Pump Discharge
Hose Kit
To Next Page
Loading...
Need help?
General
