EHN3261/3361
22
14. Manual Control
Click the button to trigger an event directly from the Live View window. If you have
configured an event (in the Event List) that will trigger a reaction (like a recording) when a Manual
Trigger event occurs, clicking this button will trigger that reaction. You can select what that reaction
will be. You can, for instance, set the camera to record the audio/video feed to the SD card on board
the camera. You can then click on the Playback button to open the Playback page and search for
and play all such recordings that had been stored on the card. Such event actions will be effective
once they have been configured in the Event List (see 7.3.2 Event).
Click the button to reset the alarm output remotely.
15. Lens Control
The Lens Control buttons can be hidden on the live view window by disable the Show Lens Control
Buttons function in the Live View Layout Settings (see 7.1.4 Display and Overlay). These buttons
control the lens actions. Click and hold the icons to continuously focus closer or farther.
Click the icons to focus one step closer or farther. Click and hold the icons to
continuously zoom in or zoom out. Click the icons to zoom in or zoom out one step
forward or backward. : Select between 1X and 4X and then click the to
change the focus speed.
Note: If you select Auto from the Focus Mode drop-down list (see Lens Settings image above), the
camera will automatically adjust focus every time you click the Zoom in/out buttons.
16. Status Display (info line that can be placed above video box or at bottom of page)
This shows the name of the camera that is currently active or being configured, current date/time
and current frame rate. You can activate these info displays in the Overlay Text Settings (see 7.1.4
Display and Overlay).
17. Event signal icons (above video screen)
When an alarm or motion event is triggered, a signal icon will appear at the top right of the Live
View window to alert the user.
Alarm event icon : When an alarm is triggered, this icon appears.
Motion detection icons : The colors of these motion event icons correspond to the
colors of the motion trigger areas you have configured in the Motion Settings (see 7.3.2 Event).
Recording icon : When the camera is recording to a PC-based folder, this icon appears.
To Next Page
Loading...
