EHN3261/3361
55
• Auto: Selecting Auto for the camera to automatically adjust the Shutter based on the
measured light level.
• ALC (Shutter Priority): Selecting ALC (Automatic Light Control) allows the camera circuitry to
either take bright spots more into consideration (peak), bringing out detail in bright areas, or
less into consideration (average) bringing out detail in shadows.
• Manual: Select this option to manually set up the IRIS, Shutter (Manual) and AGC (Manual)
values.
IRIS: This function is only activated if you select Manual in the Mode field.
Shutter (Manual): The function is only activated if you select ALC or Manual in the Mode field. If
enabled, this setting lets you set the shutter speed yourself (measured in fractions of a second).
AGC (Manual): The function is only activated if you select Manual in the Mode field. Set the
Auto Gain Control limit here. The lower the AGC level, the lower the video signal and the noise.
Slow Shutter: The function is only activated if you select Auto in the Mode field.
AGC: The function is only activated if you select Auto or ALC in the Mode field. Set the Auto
Gain Control limit here. The lower the AGC level, the lower the video signal and the noise.
Flickerless: The function is only activated if you select Auto in the Mode field. Choose between
OFF, 50HZ, 60HZ, 50HZ (High Luminance) or 60HZ (High Luminance).
【Backlight Compensation Settings】The Backlight Compensation (BLC) function is useful when the
background of the subject is very bright and the subject itself is dark. Click Apply to apply the changes
or Cancel to cancel the changes and return to the previous settings.
BLC Edit Mode: Click the Enable button, the BLC grids appear on the
image. Click on the grids to enable / disable the BLC function. The
selected grids (in green) will be applied with the BLC function.
【Features】This function can only be set up in the Advanced tab. Click Apply to apply the changes or
Cancel to cancel the changes and return to the previous settings.
Noise Reduction (NR): This limits the amount of digital “video noise” that is usually found in any
video stream, and helps to reduce file size. Select ON / OFF to enable / disable the Noise
Reduction function. Slide the Level bar to set up the level. The higher the level, the more the
reduction.
Wide Dynamic Range (WDR): The WDR function provides clearer images when both of the very
bright and dark areas simultaneously appear on the camera view. There are three value options:
OFF, ON and Auto. Note that when WDR is ON, some parts of the image may appear solarized.
This is normal for WDR, and is not a camera malfunction.
Monitor Type: Users can use this field to optimize video quality of the monitor.
To Next Page
Loading...
