7
Assembly Instructions
Step 2
a. Slide the two Rubber Rings (22)
onto the two Weight Guide Tubes
(3).
b. Slide the two Weight Plates
(15LB) (25) and seven Weight
Plates (10LB) (24) down Weight
Guide Tube (3).
c. Slide Selector Shaft Bushing (44)
down Selector Shaft (5) at First
hole fix with Selector Shaft Pin (27).
d. Insert Selector Shaft (5) into hole
of Weight Plate (24 and 25).
e. Slide Top Weight Plate (23) down
Selector Shaft (5). Insert Weight
Shaft Pin (21) into hole of desired
Weight.
To Next Page
Loading...
