Everlast REDSABRE 1500 - User Manual

1
Publish Date: 3-15-2024
LRS1500-AC
Compact, Air Cooled Fiber Laser
Weld/Cut/Clean/De-rust
1500 Watt Output
1070 nm wavelength
Safety, Setup and General Use Guide for Hand Held
Operation*
FDA Accession#: 2410134-000;
FDA Product Code: 95R—FF
*This is an early release safety and general use guide. It is considered to be a functional manual based off of engineering/factory supplied
data that covers necessary and essential operation information. It also provides basic information for safe operation of the welder. A
more detailed supplemental e- manual will be released in the future with more detailed setup and operation instructions along with more
general data. This supplemental e-manual will be able to be downloaded as soon as it comes available.
Contact:
Everlast Welders: sales@everlastwelders.com
380 Swift Ave. Unit 12
South San Francisco California, 94080
1-877-755-9353 Sales: Ext 201, Technical Support: Ext 207, Parts Ext. 206
Serial Number:_____________________________
Manufacturing Date:_______________ Purchase Date:________________
LSO Officer:_____________________________________ Employee Initials and Review Date:______________

Summary

Introduction and Safety

Product Overview

Introduces the laser welder and its capabilities.

Safety, Setup and General Use Guide

Covers primary safety, setup, and operational guidelines.

Laser Safety Warnings and Precautions

Details Class 4 laser hazards, symbols, and warnings.

Warranty and Installation

Warranty Notice and Component Handling

Information on warranty and proper care of parts.

Installation, Setup and Maintenance

Procedures for unpacking, assembly, and initial setup.

Operation and Controls

Technical Specifications

Detailed technical data of the welder.

Basic Setup and Operation

Steps for starting and operating the welder.

Control Panel and Touch Screen Interface

Explanation of controls and screen navigation.

Laser Functions and Programming

Laser Welding Technology and Settings

Programming welding parameters.

Main Control Settings

Detailed adjustments for laser operation.

Specialized Laser Functions

Instructions for cleaning, cutting, and de-rusting.

Gun and Optical System Maintenance

Optical System Care and Maintenance

Procedures for cleaning and maintaining optical parts.

Gun Information and Calibration

Details on the welding gun and laser beam alignment.

Component Adjustment and Replacement

Procedures for servicing mirrors and lenses.

Wire Feeder System

Wire Feeder Installation and Setup

Connecting and loading the wire feeder.

Wire Feeder Programming and Tuning

Adjusting feeder settings for optimal performance.

Maintenance and Troubleshooting

Routine Maintenance Schedule

Daily, weekly, monthly checks.

Annual Maintenance and Diagnosis

Yearly service and troubleshooting.

Packing List

List of included accessories.

Everlast REDSABRE 1500 Specifications

General

Amperage Range	5-150A
Duty Cycle	30% at 150A
TIG Start	Lift Start
Overload Protection	Yes
Thermal Protection	Yes
Power Factor Correction	No
Inverter Technology	IGBT
Welding Processes	Stick, TIG
Stick Electrode Size	Up to 1/8"