35
ABF 05-10-15
ENGLISH
LEDS
Led ON/OFF
Light on with label in Standby or On
STERILIZATION Led
Turned on, during a sterilization cycle.
DEFROSTING Led
Turn on, during a manual defrosting , blinking during the calculation of condensation time.
HACCP LED
Turn on during the historic alarm view.
Led START/STOP
Turned on during the execution and flashing during the maintenance.
PROGRAM Led
Light ON if in selection input program and during the performance of one of the 99 programs.
FREEZING TEMPORIZED Led
Light on if select/input blast negative temp. cycle temporized.
FREEZING TEMPERATURE Led
Light on if selected a blast chillers negative temperature. cycle (freezing).
TIME Led
Light on if selected an hard or soft temporized cycle .
LED CORE probe
Light on if selected a blast chillers temporized soft or hard
Led HARD
Light on if selected an hard cycle and visualize the set point cold room in the first phase, flashing if visualizing the set
point of the second phase.
Turned on if the first phase of a hard is in progress, flashing during the execution of the second phase.
BLAST CHILLERS Led
Light on if selected a positive blast chillers cycle.
To Next Page
Loading...
