47
ABF 05-10-15
ENGLISH
Example of press in the case of any present alarm in memory:
VISUALIZATION CODE PROJECT
Press the key Sterilization
to visualize the code project, version and revision of the present firm are in the basic
card and in the user interface.
The display DIS1 alternates the visualization of the code project and version, while the display DIS2 visualizes the code
of the revision of the present firmware in the basic label.
The following pressure of the key Sterilization
visualizes in the same way the code project, version and revision
of the present firmware in the user interface.
VISUALIZATION PROBES
Is possible visualize the temperature noticed by the probes pressing for five seconds the key Program .
The display DIS1 visualizes the label “Pr1” and the display DIS2 visualizes the value of the temperature in the cold room,
press the key Increase
to pass to the following probe.
The used labels are Pr2 to point out the probe core , Pr3 to point out the probe evaporator and Pr4 to point out the probe
condenser.
If the probe condenser has not been disposal , the visualization stops at Pr3 (it sounds evaporator).
The pressure of the key ON/OFF
to return the card in OFF.
To Next Page
Loading...
