Eversys C'2 - Page 106

Number Module /
Unit
Info Message Explanations / Remedies
The grinder
automatically
tries to start
again.
W-018 Milk
module
Milk tank empty.
Please rell the
milk tank.
Rell the milk tank. - -
W-019 Milk
module
Steam pressure
too low for milk
products.
Wait until the steam pressure
is high enough to produce a
milk product.
- -
W-020 Brewing
module
Top piston
failure left.
The machine
tries to unblock
the piston
automatically.
Contact service organisation. -
W-021 Brewing
module
Top piston
failure right.
The machine
tries to unblock
the piston
automatically.
Contact service organisation. -
W-022 Brewing
module
Bottom piston
failure left.
The machine
tries to unblock
the piston
automatically.
Contact service organisation. -
W-023 Brewing
module
Bottom piston
failure right.
The machine
tries to unblock
the piston
automatically.
Contact service organisation. -
W-024 Milk
module
Milk tank empty.
Please rell the
milk tank.
Rell the milk tank. - -
W-025 Grinder
module
No grinder turns
detected
(grinder right,
bean hopper
front).
The grinder
automatically
tries to start
again.
The grinder automatically
tries to unblock itself
(normally that already solves
the problem).
But if it couldn't unblock itself
after three times, the grinder
is blocked (the warning
W-068 (page 112) is set).
Please contact your service
technician.
-
Troubleshooting
© Eversys S.A. Page 106 of 150 02.01.2023