EasyManua.ls Logo

Eversys C'2 - Machine Care, Troubleshooting, and Options; Cleaning Procedures and Schedule

Default Icon
150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. Care
This chapter explains in detail how to clean and maintain your machine.
It is imperative to read the General safety instructions (page 8) and understand
this manual before carrying out any cleaning on the machine. In case of unclear
information, please contact your local service organisation (page 133).
Only use original Eversys cleaning products. Use of products that are not explicitly
recommended by Eversys could damage the machine or void warranty.
Ensure that no one ever ingests these cleaning solutions.
If any variation of performance is observed or suspected, even after care operations,
contact your local service organisation.
Depending on machine model and options, cleaning procedures describe in this
chapter may not be possible on your machine. For more information, contact your
service organisation.
Do not put the machine or any of its component parts in the dishwasher.
Clean under tap water with soft soap.
Dry the parts well after cleaning them. There must not be any residue from cleaning
agents.
The display of products and buttons depends on the settings.
Illustrations show software V3.17.
Illustrations show monochrome style.
7.1. Cleaning and maintenance operations
7.1.1. Cleaning
Regular cleaning is mandatory in order to ensure problem-free operation of the machine and to
ensure optimum coee quality. Refer to method and frequency under Care (page 68).
It is imperative to ensure that persons are not subject to any health hazards as a consequence of the
consumption of the food items dispensed by the machine.
If care and cleaning of the machine is not carried out properly, dispensing milk beverages will
constitute a food hygiene hazard point.
All automatic cleaning operations are logged.
For more information on the cleaning intervals, see Periodic cleaning (page 69).
7.1.2. Maintenance
Repair, commissioning and service operations must only be performed by a service
organisation appointed by the manufacturer.
The service of coee machines depends on the number of brewing chambers:
Care
© Eversys S.A. Page 68 of 150 02.01.2023

Table of Contents

Related product manuals