Eversys C'2 - Product Stop, Drawer Management, and Shutdown

1. Adjust the coee spout height (page 50).
2. Place a cup under the coee outlet.
3. Press the button with measuring scoop (1).
4. Press the desired product (2).
5. Open the powder chute lid and add one portion of ground coee max. 20 g (3). Use espresso ne
grind coee for optimal in-cup quality.
6. Close the powder chute lid and press Continue to dispense the product.
7. Wait for the product to dispense.
1
2
3
5.8.7. Dispense a powder product (e.g. choco) (machine option)
All product buttons function as start/stop buttons.
Press the button to start dispensing the product and, if necessary, to stop dispensing
manually: press the same product button again.
1. Adjust the coee spout height (page 50).
2. Place a cup under the coee outlet.
3. Press one of the powder product (e.g. Choco).
4. Wait for the product to dispense.
5.9. Product stop
Depending on settings, the STOP button may not be displayed in the products area.
Refer to User rights in the Display menu (page 141) for more information.
To stop dispensing of all products, press the stop button.
Operation
02.01.2023 Page 53 of 150 © Eversys S.A.