Eversys C'2 - Empty and Clean the Powder Container(S) (Machine Option); Clean the 1.5-Step | Milk Arm

1. Switch o (page 55) at the main power switch.
2. Gently pull down (1) to remove the choco outlet.
3. Clean with soft soap under clean water (2).
4. Gently reassemble in the reverse order.
1
2
7.4.3. Empty and clean the powder container(s) (machine option)
Depending on machine model and options, this feature may not be available. For
more information, contact your service organisation.
1. Switch o (page 55) at the main power switch.
2. Remove the top panel and the powder container lids (1).
3. Pull the containers and lift to remove them (2).
4. Remove the powder chutes (4).
5. Clean all parts with soft soap, rinse with water and dry with a soft cloth.
6. Reassemble in the reverse order.
Make sure that the powder containers and powder chutes are perfectly dry
before relling with powder.
1
2
7.4.4. Clean the 1.5-Step | milk arm
Depending on machine model and options, this feature may not be available. For
more information, contact your service organisation.
Care
© Eversys S.A. Page 88 of 150 02.01.2023