Eversys C'2 - Empty and Clean the Bean Hoppers (and Powder Chute (Machine Option)); Clean the Housing

7.3.4. Empty and clean the bean hoppers (and powder chute (machine
option))
1. Switch o (page 55) at the main power switch.
2. Remove the bean hopper lids (1).
3. Unlock the bean hoppers (2) (Closed position).
4. Remove the bean hoppers (3) and store the beans for re-use.
5. Clean the bean hoppers (4) with soft soap, rinse with water and dry with a soft cloth.
6. Reassemble in the reverse order and lock the bean hoppers (5) (Open position).
7. Fill the coee bean hoppers (page 48).
Make sure that the bean hoppers are perfectly dry before relling with coee
beans.
1
4
2
Close
5
Open
3
7.3.5. Clean the housing
• Clean the housing with a damp cloth.
Care
02.01.2023 Page 83 of 150 © Eversys S.A.