Number Module /
Unit
Info Message Explanations / Remedies
S-000 Display /
Touch
screen
Initialise, please
wait...
Wait until the initialisation
has nished.
- -
S-001 Hydraulic
module
Coee boiler is
heating...
Wait until the coee boiler
has reached its nominal
temperature.
- -
S-002 Bean
hopper
Cameo: Bean
hopper left
missing.
Enigma /
Shotmaster /
E'line: Bean
hopper rear
missing.
Check if the bean hopper or
lid is inserted correctly.
- -
S-003 Bean
hopper
Cameo: Bean
hopper right
missing.
Enigma /
Shotmaster /
E'line: Bean
hopper front
missing.
Check if the bean hopper or
lid is inserted correctly.
- -
S-004 Grounds
drawer
Please empty
the grounds
drawer.
The grounds drawer must be
emptied before the cleaning
can be started (page 54).
- -
S-005 Grounds
drawer
Risk of injury!
Please empty
the grounds
drawer carefully.
The grounds
drawer was
lled with hot
water during
cleaning.
During the cleaning the
grounds drawer is lled with
water.
Empty and clean the grounds
drawer (page 54).
- -
S-006 Grounds
drawer
Grounds drawer
is full.
Empty and clean the grounds
drawer (page 54).
- -
S-007 Grounds
drawer
Please insert the
grounds drawer.
Empty and clean the grounds
drawer (page 54).
- -
S-008 Grounds
drawer
Please insert the
grounds drawer.
The coee machine can
only continue if the grounds
drawer is inserted.
- -
S-009 Grounds
drawer
Grounds drawer
missing.
The sensor has detected that
the grounds drawer is missing.
- -
Troubleshooting
02.01.2023 Page 97 of 150 © Eversys S.A.