EVGA P55 Micro V - Hardware Installation

2
Congratulations!
Thank you for purchasing this EVGA P55 Chipset based motherboard.
This motherboard from EVGA offers high performance, quality features and superior support. If you have
any questions about this product please visit www.evga.com to read the EVGA FAQ, visit our forums or
contact us directly.
Parts NOT in the Kit
This kit contains all the hardware necessary to install and connect your new EVGA P55 Motherboard.
However, it does not contain the following items that must be purchased separately to make the motherboard
functional.
 Intel Socket 1156 Processor
 DDR3 System Memory
 Socket 1156 Cooling fan
 PCI Express Graphics Card
 Power Supply
EVGA assumes you have purchased all the necessary parts needed to allow for proper system functionality. For
a full list of supported CPU’s on this motherboard, please visit http://www.evga.com/support/motherboard/.
When replacing a motherboard in a system case, you will need to reinstall an operating system even though
the current hard disk may already have an operating system
Hardware Installation
This section will guide you through the installation of the motherboard. The topics covered in this section are:
 Preparing the motherboard
 Installing the CPU
 Installing the CPU fan
 Installing the memory
 Installing the motherboard
 Connecting cables