Need help?Do you have a question about the Eview EV-07W and is the answer not in the manual?
Press and hold the SOS button to trigger an alarm and send alerts to authorized numbers.
Initiate a call from the device by pressing and holding the side button.
Configure up to five authorized phone numbers using specific SMS commands.
Manage automatic call answering based on authorized or all numbers via SMS.
Set the device's time zone using SMS commands with UTC offsets.
Assign custom names to contacts for clearer identification in SMS alerts.
Request location via coordinates/web link or by address using SMS commands.
Receive SMS alerts and visual warnings when the device battery is critically low.
Secure commands by requiring a password before execution.
Modify the existing command password to a new secure code.
Configure virtual geographic boundaries to trigger alarms when crossed.
Receive alerts when the device exceeds a predefined speed limit.
Get SMS alerts when the tracker moves beyond a set distance.
Make silent calls to listen to the surrounding environment of the device.
Configure the device to vibrate or ring for incoming calls.
Receive SMS alerts if the device remains stationary for a specified period.
Turn off the device's LED indicators to conserve power or for discreet use.
Assign a specific phone number to be called when the side button is pressed.
Utilize Assisted GPS for faster and more accurate location fixes.
Enable or disable calls from the device during SOS or fall alarms.
Choose to send alarms only via WCDMA network instead of SMS.
Query the device status and current settings using the 'status' command.
Restart the device to apply changes or resolve minor issues without losing settings.
Restore the device to its original factory default settings using the RESET! command.
Operate with both WCDMA and GPS chips active for continuous real-time tracking.
Optimize battery life by deactivating GPS when idle, activating on motion or events.
Maximize battery life by turning off both WCDMA and GPS, activated by movement.
Receive SMS/calls; GPS activates on button press, calls, or SMS messages.
Update location at user-defined time intervals, also receive SMS/calls.
Configure the Access Point Name (APN) for WCDMA network connection using SMS.
Configure the frequency of data updates to the platform via SMS commands.
Turn off the WCDMA network connection using a specific SMS command.
Re-establish the WCDMA network connection for real-time tracking services.
Set interval for heartbeat packets to maintain WCDMA connection in certain modes.
Configure data transmission interval when the device is stationary.
View current APN, IP address, and port settings for network communication.
Modify the IP address and port for connecting to the tracking platform.
Device stores GPS data when WCDMA is unavailable; transmits when recovered.
Stop sending stored tracking history data to the platform.
To Next Page
General