19. Outgoing Call control
Command: CALL1
With this command, all registered numbers can receive the call from device if has SOS alarm or fall alarm.
Command: CALL0
With this command, all registered numbers can’t receive the call from device if has SOS alarm or fall alarm.
20. Disable SMS alarm
Command: SMS0
It only sends alarms via WCDMA network to the platform and without text message to the authorized numbers.
Enable SMS and WCDMA network alarms, just simply send SMS1 (default setting)
21. Check settings
Command: status
The device will reply E.g. A+8613812345678 B13912345678 C13712345678; Speed: 0,100km/h; GEO:0,0,0; VB:1,10S; MV:1,100; LED:0; TZ:2.0; LI: 1; PS:1;
DS:0,3M; FL:1; Bat: 95%; SMS:0;LOCK:0
To recognize the meaning of “0”& “1”
The number “0” implies that the function is turned off; whilst “1” indicates that the function is turned on.
22. Reboot device
Command: reboot
The device will restart itself without changing any settings.
To Next Page
Loading...