How to connect device to the platform for real time tracking via WCDMA network.
Open the link www.smart-tracking.com in your computer and login with your user ID and password.
For more information pls contact the seller.
WCDMA network Settings by SMS
1. APN setting
In order to use the WCDMA network function, the user needs to setup the APN by sending SMS command.
--What is APN? Access point name (APN) is the name used to identify a general packet radio service (WCDMA network) bearer service in the cellular mobile
network. The APN defines the type of service that is provided in the packet data connection.
※ Make sure that the SIM card in the tracker supports the WCDMA network function.
※ The APN can be acquired from your local network operators.
Command: S1, APN, user name, password
Notes: Some access point name without user name and password, so please leave it blank.
Example: S1,internet
“internet” is the APN from the SIM card provider; therefore, the user must set their particular APN for their own country which the unit resides.
After sending the command, the device will reply “Set APN OK! WCDMA network connecting”
After send S1,APN, wait for a while then you will see device is online.
To Next Page
Loading...