2. Set updating Time interval by SMS
Command: TIxxS/M/H
The meaning of “xx”, The setting must be in 2 digitals and maximum 99 in value, which means 01~99.
xxS is the time interval in second with range (30~99)
xxM is the time interval in minute with range (01~99)
xxH is the time interval in hour with range (01~99)
Example: TI01M
The device will reply “Set updating time interval OK!” and then device will update the time by every 1 minute on the website.
3. Disable WCDMA network
Command: S0
The device will reply “WCDMA network OFF”.
4. Reconnect WCDMA network
Reconnect the website via WCDMA network for real time tracking, please send S2
5. Setting a Heartbeat Packet Reporting Interval
The heartbeat packet function is used to keep the Transmission Control Protocol (TCP) connection open when the interval of scheduled WCDMA network
reporting is long.
Command: HBxxM/H
Note: xx=00~99, M=Minute, H=Hour, The heartbeat packet function is only available for the PS1 and PS0 working mode.
Example: HB01H
To Next Page
Loading...