9. Built-in Memory
The device built in 8Mb flash memory inside. It will store the GPS information when do not have WCDMA network coverage (i.e., very low population density
areas, some mountainous terrain, underground areas etc). The device will transmit GPS locations to the WEB server automatically once the WCDMA network
is recovered.
10. Delete stored tracking history data
Command: flush
The device will stop sending the stored tracking history data to tracking platform.
Cautions:
Please comply with the instructions to extend the unit life:
1. Don’t use & store the unit in dusty places.
2. Don’t put the unit in overheated or over cooled places.
3. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent.
4. Don’t disassemble or refit the unit.
5. Using other batteries will cause unwanted situation
Hardware Specification:
To Next Page
Loading...